catflaps.co.uk

2. Cut out hole. This may be done by drilling a hole and then using an electric jig-saw to cut along the inside of the drawn line as in Fig. 2. Be careful to cut hole square to the door, particularly with thicker doors. For screen doors use scissors or a knife to cut the hole.

3. If necessary, cut interior frame with a sharp knife to correct length to suit your door panel. Take care to keep hands clear of the blade, and support inside of moulding with a suitable piece of wood as shown in Fig. 3.  For panels from 0 to 5/8” (16mm) thick cut to line (A). 

4. Position interior frame on inside of door and mark 4 screw positions. For panels less than 7/8” (23mm) thick: remove interior frame and drill screw clearance holes in panel to approx. 3/16” (5mm) diameter. Then, using the appropriate screws and working from the inside of the house, tighten the interior frame to the exterior frame as in Fig. 4. Use the screws as follows: 
Panel Thickness
0-1/8” (0-4mm)
1/8-3/8” (4-10mm)
3/8-5/8” (10-16mm)
5/8-7/8”(16-23mm)
Screw length
1/2”(13mm)
3/4”(19mm)
1”(25mm) (not supplied)
11/4”(33mm)

For panels thicker than 7/8” (23mm) do not drill screw clearance holes: Instead first screw interior frame to inside of panel with short (1/2” / 13mm) screws. Next drill out the 4 screw holes in the exterior frame to allow close clearance on screw. (Recommended drill 5/32” (4mm) diameter). Finally fix exterior frame to exterior of door using 3/4” (19mm) screws. When happy with installation cover screw heads with caps supplied.

WALLS

After making a hole in your wall, line with 3/4” (19mm) plywood or similar material as shown in Fig. 5. This gives a neat tunnel to the installation and readily accepts the fixing screws. After construction of tunnel, proceed to step 4 above. To train your pet to use the cat flap, prop it open at first and use food as an encouragement.

3 YEAR LIMITED GUARANTEE
Pet Mate Ltd. guarantee your product for a period of three years from the date of purchase, subject to proof of purchase date. The guarantee is limited to any defect arising due to faulty materials or manufacture. Any
item will be repaired or replaced free of charge at the manufacturer’s discretion, provided that the
d:f:ct has not been caused by neglect, misuse or normal wear and tear. Your statutory rights are not affected.